Icom IC-7851 Instruction Manual page 44

2
SET MODE ITEMS
■
OTHERS SET(Continued)
SET [F-7]  OTHERS [F-5]
ITEMS
Transverter Function
Transverter Offset
RTTY Mark Frequency
RTTY Shift Width
RTTY Keying Polarity
PSK Tone Frequency
SPEECH Language
SPEECH Speed
SPEECH S-Level
SPEECH [MODE] Switch
Memo Pad Quantity
MAIN DIAL Operation
MAIN DIAL Auto TS
SUB DIAL Auto TS
MIC Up/Down Speed
Quick RIT/∂TX Clear
[NOTCH] Switch (SSB)
[NOTCH] Switch (AM)
DIGI-SEL VR Operation
FILTER Screen MAIN/SUB Se-
lect
SSB/CW Synchronous Tuning
DESCRIPTIONS
Transverter function setting.
Offset frequency setting for the transverter
operation.
RTTY mark frequency setting.
RTTY shift width setting.
RTTY keying polarity setting.
PSK tone frequency setting.
Speech language setting for the voice syn-
thesizer.
Speech speed setting for the voice synthe-
sizer.
S-Level announcement setting for the voice
synthesizer.
Operating mode speech setting when a
mode switch is pushed.
Number of memo pad channel setting.
[MAIN DIAL] accessible band setting.
Automatic tuning step function setting for
[MAIN DIAL].
Automatic tuning step function setting for
[SUB DIAL].
Rate setting for frequency change when the
microphone's [UP]/[DN] switches are held
down.
RIT/∂TX frequency quick clearing function
setting.
for SSB mode Selectable
type setting.
for AM mode
Controllable function setting for the [DIGI-
SEL] control.
FILTER Screen MAIN/SUB band select set-
ting.
Displayed frequency shift setting when op-
erating mode is toggled between SSB and
CW.
2-12
RANGE OR VALUE
ON, Auto
0.000 to 99.999 MHz
(in 1 kHz steps)
1275, 1615, 2125 (Hz)
170, 200, 425 (Hz)
Normal, Reverse
1000, 1500, 2000 (Hz)
English, Japanese
LOW, HIGH
OFF, ON
OFF, ON
5, 10
MAIN, MAIN/SUB
OFF, LOW, HIGH
LOW, HIGH
OFF, ON
notch Auto, Manual, Auto/Manual
DIGI-SEL, APF
Fix, Auto (by FILTER,PBT Op-
eration)
OFF, ON
REF.
p. 15-14
p. 15-15