Speech Level - Icom IC-7851 Instruction Manual

■ Level set screen (continued)
FM TX Tone (Bass)
Sets the bass level of the transmit audio tone in the FM
mode from –5 to +5.
FM TX Tone (Treble)
Sets the treble level of the transmit audio tone in the
FM mode from –5 to +5.
SSB TBW (WIDE)
Sets the transmission pass bandwidth to wide, by
changing the lower and higher cut-off frequencies.
• Lower frequency: 100, 200, 300 and 500 Hz
• Higher frequency: 2500, 2700, 2800 and 2900 Hz
SSB TBW (MID)
Sets the transmission pass bandwidth to mid, by
changing the lower and higher cut-off frequencies.
• Lower frequency: 100, 200, 300 and 500 Hz
• Higher frequency: 2500, 2700, 2800 and 2900 Hz
SSB TBW (NAR)
Sets the transmission pass bandwidth to narrow, by
changing the lower and higher cut-off frequencies.
• Lower frequency: 100, 200, 300 and 500 Hz
• Higher frequency: 2500, 2700, 2800 and 2900 Hz

Speech Level

Sets the voice synthesizer audio output level.
• Range: 0 to 100% (in 1% steps)
Side Tone Level
Sets the CW side tone output level.
• Range: 0 to 100% (in 1% steps)
Side Tone Level Limit
Turns the CW side tone level limiting ON or OFF.
APF AF Level
Sets the audio level for the audio peak filter in the CW
mode.
• Range: 0 to +6 dB (in 1 dB steps)
(Default: 0)
(Default: 0)
(Default: 100 – 2900)
(Default: 300 – 2700)
(Default: 500 – 2500)
(Default: 50%)
(Default: 50%)
(Default: ON)
(Default: 0 dB)
15-5
Beep Level
Sets the beep output level.
• Range: 0 to 100% (in 1% steps)
Beep Level Limit
Turns the beep output level limiting ON or OFF.
Phones Level
Sets the audio output level ratio of the headphone
and internal speaker between 0.60 and 1.40, in 0.01
steps.
Phone L/R Mix
Selects the headphone audio output.
• OFF: Outputs the
Main band's
side, and Sub band's
side.
• ON: Outputs the mixed audio.
15
SET MODE
(Default: 50%)
(Default: ON)
(Default: 0)
(Default: OFF)
audio from the left
audio from the right