Setting The Ntp Server Address - Icom IC-7851 Instruction Manual

14
CLOCK AND TIMERS
■
Time set mode (Continued)
D Setting the NTP Function
Turn the NTP (Network Time Protocol) function ON or
OFF. (Default: ON)
The NTP function automatically synchronizes the in-
ternal clock with the time management server.
• To use this function, an internet connection and default
gateway settings are necessary.
 In the Time set screen:
p](F) or [q](F) to select the "NTP Function"
q
Push [
item.
w
Rotate [MAIN DIAL] to select "ON."
• The transceiver access the NTP server address that is
set in the "NTP Server Address" item.
D Setting the NTP Server address
Set the NTP server address. (Default: time.nist.gov)
 In the Time set screen:
p](F) or [q](F) to select the "NTP Server Ad-
q
Push [
dress" item.
w
Push [EDIT](F) to edit the address or its IP ad-
dress.
• The cursor under the 1st character blinks.
e
Edit the desired character by rotating [MAIN DIAL]
or by pushing keypad for a number entry.
• Push [ABC]() or [abc]() to toggle between upper case
letters and lower case letters.
• Push [123]() or [Symbol]() to toggle between numbers
and symbols.
• Push [t](F) or [u](F) to move the cursor.
• Push [DEL](F) to delete the selected character.
• Push [SPACE](F) to enter a space.
• Pushing keypad, [0]–[9], can also enter numbers.
r
Push [EXIT/SET] to save the name.
NOTE:
The IC-7851's DHCP function is ON as the default
to be easily assigned an IP address. Change the
setting according to your network environment.
SET [F-7] > OTHERS [F-5] > DHCP (Valid after Re-
boot) (p. 15-19)
(F) Function keys
• When the "NTP Function" item is selected
• When the "NTP Server Address" item is selected
• When editing the "NTP Server Address" item
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x
y z
1 2 3 4 5 6 7 8 9 0
– .
14-4
[EXIT/SET] [MAIN DIAL]