Options - Icom IC-7851 Instruction Manual

19
SPECIFICATIONS AND OPTIONS

■ Options

IC-PW1/EURO
/50
hf mh
amplifier
Full-duty-cycle 1 kW linear amplifier including an automatic
antenna tuner. Has automatic tuning and band selection ca-
pability when used with an Icom transceiver. Full break-in
(QSK) operation. The amplifier/power supply unit and the
remote control unit are separate.
SM-50
desktop microphone
CT-17 -
ci v level converter
SP-33
external speaker
Designed for base station operation.
8 Ω
• Input impedance:
• Maximum input power: 5 W
RS-BA1
ip remote control software
To remotely control radios using the RS-BA1, BE SURE
that you comply with your local regulations.
all band w linear
z 1 k
Unidirectional, dynamic micro-
phone for base station operation.
Includes [UP]/[DOWN] switches, a
low cut switch and mic gain con-
trol.
For remote transceiver control
using a PC. You can change fre-
quencies, operating mode, mem-
ory channels, etc. (software is not
included)
SP-34
external speaker
4 audio filters, headphone jack, can be connected to 2 trans-
ceivers.
• Input impedance:
• Max. input power: 5 W
SM-30
desktop microphone
HM-36
hand microphone
Approved Icom optional equipment is designed for optimal
performance when used with an Icom transceiver.
Icom is not responsible for the destruction or damage to an
Icom transceiver in the event the Icom transceiver is used
with equipment that is not manufactured or approved by
Icom.
19-4
8 Ω
Unidirectional, electret microphone
for base station operation. Includes
a low cut switch and mic gain con-
trol.
Hand microphone equipped with
[UP]/[DOWN] switches.