Fine Programmed Scan/Fine ∂F Scan - Icom ic-7700 Instruction Manual

■ Fine programmed scan/Fine ∂F scan
PROG ∂F
F-1 F-2
EXIT/SET
FINE
F-3
In fine scan (programmed or ∂F), the scan speed de-
creases when the squelch opens, but the transceiver
keeps scanning. The scanning tuning step shifts from
50 Hz to 10 Hz when the squelch opens.
q Push
EXIT/SET
tion screen, if necessary.
w Push [SCAN] F-5
e Set for programmed scan or ∂F scan as described
on previous page.
r Push [PROG] F-1
• " PROGRAM SCAN
points blink while scanning.
t Push [FINE] F-3
• "
FINE PROGRAM SCAN
stead of " PROGRAM SCAN
tively.
y When the scan detects a signal, the scan speed
decreases but scan does not stop.
u Push [PROG]
push [FINE]
F-3
• Rotating the main dial also cancels the scan.
i Hold down [RECALL]
the frequency that is set before starting the scan, if
desired.
9-5
SCANS
several times to close a multi-func-
to select the scan screen.
or [∂F] F-2 to start a scan.
" o r " " a n d d e c i m a l
F SCAN
:
to start a fine scan.
" or " FINE F SCAN
:
" or "
F SCAN
:
or [∂F] to stop the scan;
F-1 F-2
to cancel the fine scan.
for 1 second to recall
F-6
9
" blinks in-
," respec-