Using The Memo Pad List Screen - Icom IC-7851 Instruction Manual

11
MEMORY OPERATION
■
Memo pads (Continued)
D Calling up a frequency and operating mode from Memo pads
You can easily call up the desired frequency and oper-
ating mode of Memo pads by pushing [MP-R] several
times.
• The frequency and operating mode are called up, starting
from the most recently entered.
When you call up a frequency and an operating mode
from Memo pads by pushing [MP-R], the previously
displayed frequency and operating mode are automat-
ically stored in a temporary pad. The frequency and
operating mode in the temporary pad can be recalled
by pushing [MP-R] several times.
• You may think there are 6 Memo pads because 6 different
frequencies are called up by [MP-R] (5 are in Memo pads
and 1 is in the temporary pad).
D Using the Memo pad list screen
q
Hold down [MP-R] for 1 second.
• The Memo pad list screen is displayed.
p](F) or [q](F) to select the desired Memo
w
Push [
pad.
• Hold down [DEL](F) for 1 second to delete the selected
Memo pad.
• Hold down [DEL ALL](F) for 1 second to delete all Memo
pads.
e
Push [EXIT/SET].
• Exits the Memo pad list screen.
If you change the frequency or operating mode
called up from Memo pads, the frequency and oper-
ating mode in the temporary pad are updated.
MP-R
(F) Function keys
• Memo pad list screen
11-8
[MP-R]
MP-R
Newest content
Oldest content
Memo Pads
[MP-R]
[EXIT/SET] [MAIN DIAL]
Temporary pad