Rit Function; Rit Monitor Function - Icom IC-7851 Instruction Manual

■ RIT function

The RIT (Receive Increment Tuning) function compen-
sates for differences in frequencies of other stations.
The function shifts the receive frequency up to ±9.99 kHz
in 10 Hz steps, without moving the transmit frequency.
q
Push [RIT] to turn ON the RIT function.
• "RIT" and the shift frequency are displayed.
∂TX] control.
w
Rotate the [RIT/
• Hold down [CLEAR] for 1 second to reset the RIT fre-
quency.
• Push [CLEAR] momentarily to reset the RIT fre-
quency when the quick RIT/∂TX clear function is ON.
(p. 15-15)
(SET [F-7] > OTHER [F-5] > Quick RIT/∂TX Clear)
• Hold down [RIT] for 1 second to add the frequency shift
to the operating frequency.
e
After communicating, push [RIT] to turn OFF the

RIT function.

D RIT monitor function
When the RIT function is ON, holding down [XFC] al-
lows you to directly monitor the operating frequency
(RIT is temporarily cancelled).
FUNCTIONS FOR RECEIVE
• When selecting RIT function
7-3
7
∂
[RIT/ TX] [RIT]
[XFC] [CLEAR]