Icom IC-7851 Instruction Manual page 228

■ Others set screen (continued)
Keyboard [F1]–[F8] (KEYER)
Enables keyer memory transmission using a keyboard
connected to [USB A].
• OFF: Turn OFF the function.
• ON: Pushing one of [F1] to [F8] on the keyboard,
transmits the programmed keyer memory.
Holding down [SHIFT] and pushing one of [F1]
to [F8] on the keyboard repeatedly transmits
memory.
Screen Capture [POWER] SW
Assigns the Screen capture function to the [POWER]
key.
• OFF: The [POWER] key does not act as the Screen
capture key.
• ON: Push the [POWER] key to capture the screen.
The captured screen is saved onto the select-
ed storage media in the selected data format.
Screen Capture Keyboard [Print Screen]
Assigns the Screen capture function to the [Print
Screen] key on the USB keyboard.
• OFF: The [Print Screen] key does not act as the
Screen capture key.
• ON: Push the [Print Screen] key to capture the
screen. The captured screen is saved onto the
selected storage media in the selected data
format.
Screen Capture Storage Media
Select the storage media for the Screen capture func-
tion.
• Options: SD CARD or USB flash drive.
Screen Capture Data Format
Select the data format for the Screen capture func-
tion.
• Options: PNG or BMP
When the Screen capture function is assigned to ei-
ther the [POWER] key or [Print Screen] on the USB
keyboard:
q
Set a desired screen.
w
Push [POWER] or [Print screen] to capture the
screen.
• The captured screen is saved onto the selected stor-
age media in the selected data format.
You can display the captured screen on the transceiver dis-
play. See page 10-10 for details.
(Default: OFF)
(Default: OFF)
(Default: OFF)
(Default: SD CARD)
(Default: PNG)
15-17
Shutdown Function
Selects the shutdown option.
• Shutdown: Shuts down right after [POW-
ER] has been held down for
1 second.
• Standby/Shutdown: Enters the remote
mode.
If the remote standby mode is
selected, the
remotely turned ON later using
the optional RS-BA1.
 When "Standby/Shutdown" is selected
q
Hold down [POWER] for approximately for 1 second
to turn OFF the power.
• The shutdown option dialogue appears.
w
Select the shutdown option using [
• If you want to turn OFF the power immediately, select
"Shutdown."
• If you want to remotely turn ON the power later, select
"Standby (for Remote Control)."
* The power indicator, which is located on the right
above [POWER], slowly blinks Orange.
The cooling fan still rotates.
e
Push [POWER].
CI-V Baud Rate
Selects the CI-V data transfer rate.
• Options: 4800, 9600, 19200 (bps) and Auto
When "Auto" is selected, the baud rate is automati-
cally set, according to the data rate of the connect-
ed controller.
CI-V Address
Selects the CI-V address.
• Range: 02h–8Eh–DFh
"8Eh" is the default address of IC-7851.
CI-V Transceive
Turns the Transceive function ON or OFF.
• OFF: Turn the function OFF.
• ON: Turn the function ON.
15
SET MODE
(Default: Shutdown)
standby
IC-7851 can be
p](F) or [q](F).
(Default: Auto)
(Default: 8Eh)
(Default: ON)