Fine Programmed Scan - Icom iC-7850 Instruction Manual

Previous view Previous view
12
SCANS

■ Fine Programmed scan

In the Fine Programmed scan, the scan speed de-
creases when the squelch opens, but the transceiver
keeps scanning. The scanning tuning step
10 Hz when the squelch opens.
 The Multi-function screens are OFF.
Push [SCAN](F).
q
• The Scan screen is displayed.
Set for a Programmed scan as described on
w
12-5.
Push [PROG](F) to start a scan.
e
• "
scanning.
Push [FINE](F) to start a fine scan.
r
• "
• Push [PROG](F) to cancel the scan
• Push [FINE](F) to release the Fine Programmed scan
function.
• Rotating [MAIN DIAL] also cancels the scan.
• Hold down [RECALL](F) for 1 second to recall the fre-
quencies that are set before starting the scan (P1 and
P2), if desired.
When the scan detects a signal, the scan speed de-
creases but the scan does not stop.
changes to
" and decimal points blink while
" blinks.
(F) Function keys
page
Mode keys
• While scanning
Blinks
12-6
[V/M] [TS]
[EXIT/SET] [MAIN DIAL]
Blinks