Icom IC-7851 Instruction Manual page 130

Fixed Edges (22.00 – 26.00)
(Default: 24.890–24.990 MHz)
(Default: 24.890–24.930 MHz)
(Default: 24.930–24.990 MHz)
Set the Upper and Lower Edge frequencies for the
Fixed mode. Three edges are assigned to each band.
Push [EDGE](F) to select the edge.
• Selectable range: 22.000 ~ 26.000 MHz
• Push [t u](F) to select Upper or Lower frequency,
and rotate [MAIN DIAL] to select the frequency.
Fixed Edges (26.00 – 30.00)
(Default: 28.000–29.000 MHz)
(Default: 28.000–28.200 MHz)
(Default: 28.200–29.000 MHz)
Set the Upper and Lower Edge frequencies for the
Fixed mode. Three edges are assigned to each band.
Push [EDGE](F) to select the edge.
• Selectable range: 26.000 ~ 30.000 MHz
• Push [t u](F) to select Upper or Lower frequency,
and rotate [MAIN DIAL] to select the frequency.
Fixed Edges (30.00 – 45.00)
(Default: 30.000–31.000 MHz)
(Default: 30.000–31.000 MHz)
(Default: 30.000–31.000 MHz)
Set the Upper and Lower Edge frequencies for the
Fixed mode. Three edges are assigned to each band.
Push [EDGE](F) to select the edge.
• Selectable range: 30.000 ~ 45.000 MHz
• Push [t u](F) to select Upper or Lower frequency,
and rotate [MAIN DIAL] to select the frequency.
Fixed Edges (45.00 – 60.00)
(Default: 50.000–51.000 MHz)
(Default: 50.000–50.100 MHz)
(Default: 50.100–50.300 MHz)
Set the Upper and Lower Edge frequencies for the
Fixed mode. Three edges are assigned to each band.
Push [EDGE](F) to select the edge.
• Selectable range: 45.000 ~ 60.000 MHz
• Push [t u](F) to select Upper or Lower frequency,
and rotate [MAIN DIAL] to select the frequency.
6-13
SCOPE OPERATION
6