Main Dial Auto Ts - Icom IC-7851 Instruction Manual

■ Others set screen (continued)
SPEECH [MODE] Switch
Turns the operating mode announcement ON or OFF.
• OFF: The operating mode is announced.
• ON: The operating mode is announcer when the
mode is changed.
Memo Pad Quantity
Sets the number of memo pad channels.
• 5: 5 channels.
• 10: 10 channels.
MAIN DIAL Operation
Selects [MAIN DIAL] operating mode.
• MAIN: The only
set by rotating [MAIN DIAL].
• MAIN/SUB: The
Sub band
set by rotating [MAIN DIAL] when the
Sub band

MAIN DIAL Auto TS

Sets the Automatic Tuning Step function for [MAIN
DIAL].
When rapidly rotating [MAIN DIAL], the tuning step
is automatically changed according to the rotation
speed.
• OFF: Turn OFF the function.
• LOW: Tuning step is automatically changed in the
low step.
• HIGH: Tuning step is automatically changed in the
high step.
SUB DIAL Auto TS
Sets the Automatic Tuning Step function for [SUB
DIAL].
When rapidly rotating [SUB DIAL], the tuning step
is automatically changed according to the rotation
speed.
• OFF: Turn OFF the function.
• LOW: Tuning step is automatically changed in the
low step.
• HIGH: Tuning step is automatically changed in the
high step.
MIC Up/Down Speed
Sets the response speed of [UP]/[DN] on the optional
microphone.
• LOW: Slow.
• HIGH: Fast.
(Default: OFF)
(Default: 5)
(Default: MAIN/SUB)
Main band frequency can be
frequency can be also
is selected.
(Default: HIGH)
(Default: HIGH)
(Default: HIGH)
Quick RIT/∂TX Clear
Selects the operation of [CLEAR] for the RIT/
function.
• OFF: Cleared when [CLEAR] is held down for 1 sec-
ond.
• ON: Cleared when [CLEAR] is pushed.
[NOTCH] Switch (SSB)
Selects the notch function for the SSB mode.
• Auto: Auto notch.
• Manual: Manual notch.
• Auto/Manual: Auto notch and manual notch can be
toggled.
[NOTCH] Switch (AM)
Selects the notch function for the AM mode.
• Auto: Auto notch.
• Manual: Manual notch.
• Auto/Manual: Auto notch and manual notch can be
toggled.
DIGI-SEL VR Operation
Selects the function assigned to [DIGI-SEL].
• DIGI-SEL: Used for the digital selector adjustment.
• APF: Used for the audio peak filter adjust-
ment.
FILTER Screen MAIN/SUB Select
(Default: Auto (by FILTER,PBT Operation))
Selects the filter setting display.
• Fix: (always)
The selected band's filter setting is always dis-
played.
• AUTO (By FILTER,PBT Operation): (relative)
The displayed filter setting is automatically changed
when [FILTER]/[PBT] is pushed/rotated.
SSB/CW Synchronous Tuning
Turns the Displayed Frequency Shift function ON or
OFF.
This function automatically shifts the frequency to
match the CW pitch when the operating mode is tog-
gled between SSB and CW.
• OFF: Stays on the frequency even when the operat-
ing mode is changed between SSB and CW.
• ON: Shifts the frequency when the operating mode
is toggled between SSB and CW, to keep re-
ceiving the signal.
15-15
15
SET MODE
(Default: OFF)
∂
TX
(Default: Auto/Manual)
(Default: Auto/Manual)
(Default: DIGI-SEL)
(Default: OFF)