Icom IC-7851 Instruction Manual page 95

5
RECEIVE AND TRANSMIT
■
Operating RTTY (FSK) (Continued)
D Automatic transmission/reception setting
q
Display the RTTY decode screen, then push [TX
MEM](F).
DECODE [F-3]  TX MEM [F-4]
• The RTTY memory screen is displayed.
w
Push [EDIT](F).
• The RTTY memory edit screen is displayed.
e
Push [RT1..RT8](F) several times.
• Push [RT1..RT8] to select the TX memory.
(RT1 RT2 RT3     RT8 RT1)
r
Push [AUTO TX](F) several times.
• Push [AUTO TX](F) to select the Auto TX/RX setting.
( AUTO TX/RXAUTO TXAUTO RX (No indication)
 AUTO TX/RX)
Selection
AUTO Automatically
TX/RX memory and returns to receive.
Automatically
AUTO
memory. To return to receive, push [F12]
TX
on the keyboard.
Push [F12] on the keyboard to transmit the
AUTO
selected memory. Automatically returns to
RX
receive after transmission.
Push [F12] on the keyboard to transmit the
No indica-
selected memory and push [F12] again to
tion
return to receive.
t
Push [EXIT/SET].
• Exits the RTTY memory edit screen.
Action
transmits the selected
transmits the selected
(F) Function keys
• RTTY memory edit screen
NOTE: When no keyboard is connected, the trans-
ceiver always functions using the "AUTO TX/RX"
setting.
5-18
[EXIT/SET]