Chapter 13
| Port Mirroring Commands
RSPAN Mirroring Commands
show rspan
Use this command to displays the configuration settings for an RSPAN session.
Syntax
show rspan session [session-id]
session-id – A number identifying this RSPAN session. (Range: 1)
Only one mirror session is allowed, including both local and remote
mirroring. If local mirroring is enabled with the
then no session can be configured for RSPAN.
Command Mode
Privileged Exec
Example
Console#show rspan session
RSPAN Session ID
Source Ports (mirrored ports)
RX Only
TX Only
BOTH
Destination Port (monitor port) : Eth 1/2
Destination Tagged Mode
Switch Role
RSPAN VLAN
RSPAN Uplink Ports
Operation Status
Console#
: 1
: None
: None
: None
: None
: Untagged
: Destination
: 2
: Eth 1/3
: Up
– 390 –
port monitor
command,