Banner Configure - Edge-Core ECS4210-12P Reference Manual

Table 10: Banner Commands
Command

banner configure

lp-number
banner configure manager-
info
banner configure mux
banner configure note
show banner
banner configure
This command is used to interactively specify administrative information for this
device.
Syntax
Default Setting
None
Command Mode
Global Configuration
Command Usage
The administrator can batch-input all details for the switch with one command.
When the administrator finishes typing the company name and presses the enter
key, the script prompts for the next piece of information, and so on, until all
information has been entered. Pressing enter without inputting information at any
prompt during the script's operation will leave the field empty. Spaces can be used
during script mode because pressing the enter key signifies the end of data input.
The delete and left-arrow keys terminate the script. The use of the backspace key
during script mode is not supported. If, for example, a mistake is made in the
company name, it can be corrected with the banner configure company
command.
Example
Function
Configures the LP Number information that is displayed by
banner
Configures the Manager contact information that is
displayed by banner
Configures the MUX information that is displayed by
banner
Configures miscellaneous information that is displayed by
banner under the Notes heading
Displays all banner information
banner configure
Console(config)#banner configure
Company: EdgeCore Networks
Responsible department: R&D Dept
Name and telephone to Contact the management people
Manager1 name: Sr. Network Admin
phone number: 123-555-1212
Manager2 name: Jr. Network Admin
phone number: 123-555-1213
Manager3 name: Night-shift Net Admin / Janitor
phone number: 123-555-1214
– 85 –
Chapter 4
| System Management Commands
(Continued)
Banner Information
Mode
GC
GC
GC
GC
NE, PE