Banner Configure Dc-Power-Info; Banner Configure Department - Edge-Core ECS4210-12P Reference Manual

banner configure
This command is use to configure DC power information displayed in the banner.
Use the no form to restore the default setting.
dc-power-info
Syntax
Default Setting
None
Command Mode
Global Configuration
Command Usage
Input strings cannot contain spaces. The banner configure dc-power-info
command interprets spaces as data input boundaries. The use of underscores ( _ )
or other unobtrusive non-letter characters is suggested for situations where white
space is necessary for clarity.
Example
banner configure
This command is used to configure the department information displayed in the
department banner. Use the no form to restore the default setting.
Syntax
Default Setting
None
banner configure dc-power-info floor floor-id row row-id rack rack-id
electrical-circuit ec-id
no banner configure dc-power-info [floor | row | rack | electrical-circuit]
floor-id - The floor number.
row-id - The row number.
rack-id - The rack number.
ec-id - The electrical circuit ID.
Maximum length of each parameter: 32 characters
Console(config)#banner configure dc-power-info floor 3 row 15 rack 24
electrical-circuit 48v-id_3.15.24.2
Console(config)#
banner configure department dept-name
no banner configure department
dept-name - The name of the department. (Maximum length: 32 characters)
– 87 –
Chapter 4
| System Management Commands
Banner Information