Show Auto-Traffic-Control Interface - Edge-Core ECS4210-12P Reference Manual

Chapter 14
| Congestion Control Commands
Automatic Traffic Control Commands
show auto-traffic-
control interface
This command shows interface configuration settings and storm control status for
the specified port.
Syntax
show auto-traffic-control interface [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/28)
Command Mode
Privileged Exec
Example
Console#show auto-traffic-control interface ethernet 1/1
Eth 1/1 Information
------------------------------------------------------------------------
Storm Control:
State:
Action:
Auto Release Control:
Alarm Fire Threshold(Kpps): 128
Alarm Clear Threshold(Kpps):128
Trap Storm Fire:
Trap Storm Clear:
Trap Traffic Apply:
Trap Traffic Release:
Console#
Broadcast
Disabled
rate-control
Disabled
Disabled
Disabled
Disabled
Disabled
– 410 –
Multicast
Disabled
rate-control
Disabled
128
128
Disabled
Disabled
Disabled
Disabled