Table 119: Radius Server Avps; Show Ip Igmp Filter - Edge-Core ECS4210-12P Reference Manual

◆
◆
◆
Example

show ip igmp filter

This command displays the global and interface settings for IGMP filtering.
Syntax
Default Setting
None
Command Mode
Privileged Exec
When receiving an IGMPv3 report message, the switch will send the access
request to the RADIUS server only when the record type is IS_EX
(MODE_IS_EXCLUDE) which excludes a source list, or TO_EX
(CHANGE_TO_EXCLUDE_MODE), and the source list is empty. Other type of
packets will not be authenticated.
The first time the report is received and is being authenticated, regardless of
whether the authentication result succeeds or fails, this report will still be sent
to any configured multicatst router port.
The attribute value pairs configured on the RADIUS server are shown below.

Table 119: RADIUS Server AVPs

Attribute Name
USER_NAME
USER_PASSWORD
NAS_IP_ADDRESS
NAS_PORT
FRAMED_IP_ADDRESS
Console(config)#interface ethernet 1/1
Console(config-if)#ip igmp query-drop
Console(config-if)#
show ip igmp filter [interface interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/28)
port-channel channel-id (Range: 1-8/12)
– 567 –
Chapter 22
AVP Type Entry
1 User MAC address
2 User MAC address
4 Switch IP
5 User port
8 Multicast group IP
| Multicast Filtering Commands
IGMP Filtering and Throttling