Show Ip Igmp Snooping Mrouter - Edge-Core ECS4210-12P Reference Manual

show ip igmp
This command displays information on statically configured and dynamically
learned multicast router ports.
snooping mrouter
Syntax
Default Setting
Displays multicast router ports for all configured VLANs.
Command Mode
Privileged Exec
Command Usage
Multicast router port types displayed include Static or Dynamic.
Example
The following shows the ports in VLAN 1 which are attached to multicast routers.
show ip igmp
This command shows IGMP snooping protocol statistics for the specified interface.
snooping statistics
Syntax
Default Setting
None
show ip igmp snooping mrouter [vlan vlan-id]
vlan-id - VLAN ID (Range: 1-4094)
Console#show ip igmp snooping mrouter vlan 1
VLAN M'cast Router Ports Type
---- ------------------- ------- --------
1 Eth 1/4
1 Eth 1/10
Console#
show ip igmp snooping statistics
{input [interface interface] |
output [interface interface] |
query [vlan vlan-id]}
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/28)
port-channel channel-id (Range: 1-8/12)
vlan vlan-id - VLAN ID (Range: 1-4094)
query - Displays IGMP snooping-related statistics.
– 557 –
Chapter 22
Expire
Dynamic 0:4:28
Static
| Multicast Filtering Commands
IGMP Snooping