Show Qos Map Trust-Mode - Edge-Core ECS4210-12P Reference Manual

show qos map
This command shows the QoS mapping mode.
trust-mode
Syntax
show qos map trust-mode interface interface
Command Mode
Privileged Exec
Example
The following shows that the trust mode is set to CoS:
Console#show qos map trust-mode interface ethernet 1/5
Information of Eth 1/5
CoS Map mode:
Console#
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/28)
port-channel channel-id (Range: 1-8/12)
CoS mode
– 517 –
Chapter 20
| Class of Service Commands
Priority Commands (Layer 3 and 4)