Table 75: Show Power Inline Status - Display Description - Edge-Core ECS4210-12P Reference Manual

◆
Example
show power inline
This command displays the current power status for all ports or for specific ports.
status
Syntax
Command Mode
Privileged Exec
Example

Table 75: show power inline status - display description

Field
Admin
Oper
If a device is connected to a switch port after bootup and the switch detects
that it requires more than the power budget set for the port or for the overall
switch, no power is supplied to the device regardless of its priority setting.
Console(config)#interface ethernet 1/1
Console(config-if)#power inline priority 2
Console(config-if)#
show power inline status [interface]
interface
ethernet
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-12/24)
Console#show power inline status
Unit: 1
Compatible mode : Enabled
Time
Interface Admin Range
--------- -------- -------- ---- -------- -------- --------
Eth 1/ 1 Enabled --
Eth 1/ 2 Enabled --
Eth 1/ 3 Enabled --
Eth 1/ 4 Enabled --
Eth 1/ 5 Enabled --
Eth 1/ 6 Enabled --
Eth 1/ 7 Enabled --
Eth 1/ 8 Enabled --
Eth 1/ 9 Enabled --
Eth 1/10 Enabled --
Eth 1/11 Enabled --
Eth /12 Enabled --
. .
.
Description
The power mode set on the port (see
The current operating power status (displays on or off )
– 379 –
Chapter 12
| Power over Ethernet Commands
Max Used
Oper Power Power
Off 34200 mW 0 mW
Off 34200 mW 0 mW
Off 34200 mW 7505 mW
Off 34200 mW 0 mW
Off 34200 mW 0 mW
Off 34200 mW 0 mW
Off 15400 mW 8597 mW
Off 15400 mW 0 mW
Off 15400 mW 0 mW
Off 15400 mW 0 mW
Off 15400 mW 0 mW
Off 15400 mW 0 mW
power inline)
Priority
Low
Low
Low
Low
Low
Low
Low
Low
Low
Low
Low
Low