Chapter 4
| System Management Commands
Switch Clustering
rcommand
show cluster
This command provides access to a cluster Member CLI for configuration.
Syntax
rcommand id member-id
member-id - The ID number of the Member switch. (Range: 1-36)
Command Mode
Privileged Exec
Command Usage
◆
This command only operates through a Telnet connection to the Commander
switch. Managing cluster Members using the local console CLI on the
Commander is not supported.
◆
There is no need to enter the username and password for access to the Member
switch CLI.
Example
Console#rcommand id 1
CLI session with the ECS4210-28T is opened.
To end the CLI session, enter [Exit].
Vty-0##
This command shows the switch clustering configuration.
Command Mode
Privileged Exec
Example
Console#show cluster
Role
Interval Heartbeat
Heartbeat Loss Count : 3 seconds
Number of Members
Number of Candidates : 2
Console#
: commander
: 30
: 1
– 148 –