Edge-Core ECS4210-12P Reference Manual page 67

public-key
qos
queue
radius-server
reload
rmon
rspan
running-config
snmp
sntp
spanning-tree
ssh
startup-config
subnet-vlan
system
tacacs-server
tech-support
time-range
traffic-segmentation
udld
upgrade
users
version
vlan
vlan-translation
voice
watchdog
web-auth
Console#show
The command "show interfaces ?" will display the following information:
Console#show interfaces ?
brief Shows brief interface description
counters Interface counters information
protocol-vlan Protocol-VLAN information
status Shows interface status
switchport Shows interface switchport information
transceiver Interface of transceiver information
Console#
Show commands which display more than one page of information (e.g., show
running-config) pause and require you to press the [Space] bar to continue
displaying one more page, the [Enter] key to display one more line, or the [a] key to
display the rest of the information without stopping. You can press any other key to
terminate the display.
Chapter 2
Public key information
Quality of Service
Priority queue information
RADIUS server information
Shows the reload settings
Remote Monitoring Protocol
Display status of the current RSPAN configuration
Information on the running configuration
Simple Network Management Protocol configuration and
statistics
Simple Network Time Protocol configuration
Spanning-tree configuration
Secure shell server connections
Startup system configuration
IP subnet-based VLAN information
System information
TACACS server information
Technical information
Time range
Traffic segmentation information
Displays UDLD information
Shows upgrade information
Information about users logged in
System hardware and software versions
Shows virtual LAN settings
VLAN translation information
Shows the voice VLAN information
Displays watchdog status
Shows web authentication configuration
– 67 –
| Using the Command Line Interface
Entering Commands