Table 34: Authentication Sequence Commands; Show Privilege - Edge-Core ECS4210-12P Reference Manual

show privilege

Authentication Sequence
Example
This example sets the privilege level for the ping command to Privileged Exec.
Console(config)#privilege exec level 15 ping
Console(config)#
This command shows the privilege level for the current user, or the privilege level
for commands modified by the
Syntax
show privilege [command]
command - Displays the privilege level for all commands modified by the
privilege command.
Command Mode
Privileged Exec
Example
This example shows the privilege level for any command modified by the
command.
Console#show privilege command
privilege line all level 0 accounting
privilege exec level 15 ping
Console(config)#
Three authentication methods can be specified to authenticate users logging into
the system for management access. The commands in this section can be used to
define the authentication method and sequence.

Table 34: Authentication Sequence Commands

Command
authentication enable
authentication login
Chapter 7
privilege command.
Function
Defines the authentication method and precedence for
command mode change
Defines logon authentication method and precedence
– 185 –
| Authentication Commands
Authentication Sequence
privilege
Mode
GC
GC