Edge-Core ECS4210-12P Reference Manual page 249

Table 49: show port security - display description
Field Description
MaxMacCnt The maximum number of addresses which can be stored in the address table for
this interface (either dynamic or static).
CurrMacCnt The current number of secure entries in the address table.
The following example shows the port security settings and number of secure
addresses for a specific port. The Last Intrusion MAC and Last Time Detected
Intrusion MAC fields show information about the last detected intrusion MAC
address. These fields are not applicable if no intrusion has been detected or port
security is disabled. The MAC Filter ID field is configured by the
port-mac-filter command. If this field displays Disabled, then any unknown source
MAC address can be learned as a secure MAC address. If it displays a filter identifier,
then only source MAC address entries in MAC Filter table can be learned as secure
MAC addresses.
Console#show port security interface ethernet 1/2
Global Port Security Parameters
Secure MAC Aging Mode : Disabled
Port Security Details
Port
Port Security
Port Status
Intrusion Action
Max MAC Count
Current MAC Count
MAC Filter ID
Last Intrusion MAC
Last Time Detected Intrusion MAC
Console#
This example shows information about a detected intrusion.
Console#show port security interface ethernet 1/2
Global Port Security Parameters
Secure MAC Aging Mode : Disabled
Port Security Details
Port
Port Security
Port Status
Intrusion Action
Max MAC Count
Current MAC Count
MAC Filter ID
Last Intrusion MAC
Last Time Detected Intrusion MAC
Console#
Chapter 8
: 1/2
: Enabled
: Secure/Up
: None
: 0
: 0
: Disabled
: NA
: NA
: 1/2
: Enabled
: Secure/Up
: None
: 0
: 0
: 2
: 00-10-22-00-00-01
: 2010/7/29 15:13:03
– 249 –
| General Security Measures
Port Security
(Continued)
network-access