Edge-Core ECS4210-12P Reference Manual page 626

Chapter 24
| Domain Name Service Commands
ip host
ip mdns
Default Domain Name:
sample.com
Domain Name List:
Name Server List:
Console#
Related Commands
ip domain-list (623)
ip name-server (627)
ip domain-lookup (624)
This command creates a static entry in the DNS table that maps a host name to an
IPv4 address. Use the no form to remove an entry.
Syntax
[no] ip host name address
name - Name of an IPv4 host. (Range: 1-100 characters)
address - Corresponding IPv4 address.
Default Setting
No static entries
Command Mode
Global Configuration
Command Usage
Use the no ip host command to clear static entries, or the
clear dynamic entries.
Example
This example maps an IPv4 address to a host name.
Console(config)#ip host rd5 192.168.1.55
Console(config)#end
Console#show hosts
No. Flag Type IP Address
---- ---- ------- --------------------
0 2 Address 192.168.1.55
Console#
This command enables multicast DNS host name-to-address mapping on the local
network without the need for a dedicated DNS server.
Syntax
[no] ip mdns
TTL
----- ------------------------------
– 626 –
clear host command to
Domain
rd5