Table 142: Show Ipv6 Mtu - Display Description - Edge-Core ECS4210-12P Reference Manual

Table 141: show ipv6 interface - display description
Field
ND retransmit
interval
ND reachable
time
This example displays a brief summary of IPv6 addresses configured on the switch.
Console#show ipv6 interface brief
Interface
--------------- ---------- ---------- ------------------------------------
VLAN 1
VLAN 1
Console#
Related Commands
show ip interface (649)
show ipv6 mtu
This command displays the maximum transmission unit (MTU) cache for
destinations that have returned an ICMP packet-too-big message along with an
acceptable MTU to this switch.
Command Mode
Normal Exec, Privileged Exec
Example
The following example shows the MTU cache for this device:
Console#show ipv6 mtu
MTU
1400
1280
Console#

Table 142: show ipv6 mtu - display description

Field
MTU
Since
Destination
Address
* No information is displayed if an IPv6 address has not been assigned to the switch.
Description
The interval between IPv6 neighbor solicitation retransmissions sent on an
interface during duplicate address detection.
The amount of time a remote IPv6 node is considered reachable after a
reachability confirmation event has occurred
VLAN IPv6
Up Up
Up Up
Since Destination Address
00:04:21 5000:1::3
00:04:50 FE80::203:A0FF:FED6:141D
Description
Adjusted MTU contained in the ICMP packet-too-big message returned from this
destination, and now used for all traffic sent along this path.
Time since an ICMP packet-too-big message was received from this destination.
Address which sent an ICMP packet-too-big message.
– 667 –
Chapter 26
| IP Interface Commands
Interface Address Configuration and Utilities
(Continued)
IPv6 Address
2001:DB8:2222:7273::72/96
FE80::2E0:CFF:FE00:FD%1/64
*