Mac Access-Group - Edge-Core ECS4210-12P Reference Manual

Command Usage
◆
◆
◆
Example
Related Commands
permit, deny (336)

mac access-group (338)

show mac access-list (339)
mac access-group
This command binds a MAC ACL to all ports. Use the no form to remove the
binding.
Syntax
Default Setting
None
Command Mode
Global Configuration
Command Usage
If an MAC ACL is already bound to all ports and you bind a different MAC ACL to it,
the switch will replace the old binding with the new one.
Example
When you create a new ACL or enter configuration mode for an existing ACL,
use the permit or deny command to add new rules to the bottom of the list.
To remove a rule, use the no permit or no deny command followed by the
exact text of a previously configured rule.
A MAC ACL can contain up to 45 rules.
Console(config)#access-list mac jerry
Console(config-mac-acl)#
mac access-group acl-name in
[time-range time-range-name] [counter]
acl-name – Name of the ACL. (Maximum length: 16 characters)
in – Indicates that this list applies to ingress packets.
time-range-name - Name of the time range. (Range: 1-30 characters)
counter – Enables counter for ACL statistics.
Console(config-if)#mac access-group jerry in
Console(config-if)#
– 335 –
Chapter 9
| Access Control Lists
MAC ACLs