Table 35: Radius Client Commands - Edge-Core ECS4210-12P Reference Manual

Chapter 7
| Authentication Commands
RADIUS Client
RADIUS Client
radius-server
acct-port
Remote Authentication Dial-in User Service (RADIUS) is a logon authentication
protocol that uses software running on a central server to control access to RADIUS-
aware devices on the network. An authentication server contains a database of
multiple user name/password pairs with associated privilege levels for each user or
group that require management access to a switch.

Table 35: RADIUS Client Commands

Command
radius-server acct-port
radius-server auth-port
radius-server host
radius-server key
radius-server retransmit
radius-server timeout
show radius-server
This command sets the RADIUS server network port for accounting messages. Use
the no form to restore the default.
Syntax
radius-server acct-port port-number
no radius-server acct-port
port-number - RADIUS server UDP port used for accounting messages.
(Range: 1-65535)
Default Setting
1813
Command Mode
Global Configuration
Example
Console(config)#radius-server acct-port 181
Console(config)#
Function
Sets the RADIUS server network port
Sets the RADIUS server network port
Specifies the RADIUS server
Sets the RADIUS encryption key
Sets the number of retries
Sets the interval between sending authentication requests GC
Shows the current RADIUS settings
– 188 –
Mode
GC
GC
GC
GC
GC
PE