Table 111: Quality Of Service Commands - Edge-Core ECS4210-12P Reference Manual

21
Quality of Service Commands
The commands described in this section are used to configure Differentiated
Services (DiffServ) classification criteria and service policies. You can classify traffic
based on access lists, IP Precedence or DSCP values, or VLANs. Using access lists
allows you select traffic based on Layer 2, Layer 3, or Layer 4 information contained
in each packet.

Table 111: Quality of Service Commands

Command
class-map
description
match
rename
policy-map
description
class
rename
police flow
police srtcm-color
police trtcm-color
set cos
set ip dscp
set phb
service-policy
show class-map
show policy-map
show policy-map interface
Function
Creates a class map for a type of traffic
Specifies the description of a class map
Defines the criteria used to classify traffic
Redefines the name of a class map
Creates a policy map for multiple interfaces
Specifies the description of a policy map
Defines a traffic classification for the policy to act on
Redefines the name of a policy map
Defines an enforcer for classified traffic based on a metered
flow rate
Defines an enforcer for classified traffic based on a single
rate three color meter
Defines an enforcer for classified traffic based on a two rate
three color meter
Services IP traffic by setting a class of service value for
matching packets for internal processing
Services IP traffic by setting an IP DSCP value for matching
packets for internal processing
Services IP traffic by setting a per-hop behavior value for
matching packets for internal processing
Applies a policy map defined by the
to the input of a particular interface
Displays the QoS class maps which define matching criteria
used for classifying traffic
Displays the QoS policy maps which define classification
criteria for incoming traffic, and may include policers for
bandwidth limitations
Displays the configuration of all classes configured for all
service policies on the specified interface
– 519 –
Mode
GC
CM
CM
CM
GC
PM
PM
PM
PM-C
PM-C
PM-C
PM-C
PM-C
PM-C
policy-map command IC
PE
PE
PE