Lldp Dot3-Tlv Max-Frame - Edge-Core ECS4210-12P Reference Manual

Command Usage
This option advertises MAC/PHY configuration/status which includes information
about auto-negotiation support/capabilities, and operational Multistation Access
Unit (MAU) type.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#no lldp dot3-tlv mac-phy
Console(config-if)#
lldp dot3-tlv
This command configures an LLDP-enabled port to advertise its maximum frame
max-frame size. Use the no form to disable this feature.
Syntax
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Refer to
frame size for this switch.
Example
Console(config)#interface ethernet 1/1
Console(config-if)#lldp dot3-tlv max-frame
Console(config-if)#
lldp dot3-tlv poe
This command configures an LLDP-enabled port to advertise its Power-over-
Ethernet (PoE) capabilities
Syntax
Default Setting
Enabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
12. ECS4210-12P, ECS4210-28P
[no] lldp dot3-tlv max-frame
"Frame Size" on page 102
12
[no] lldp dot3-tlv poe
– 611 –
for information on configuring the maximum
. Use the no form to disable this feature.
Chapter 23
| LLDP Commands