Example
accounting dot1x
This command applies an accounting method for 802.1X service requests on an
interface. Use the no form to disable accounting on the interface.
Syntax
Default Setting
None
Command Mode
Interface Configuration
Example
accounting exec
This command applies an accounting method to local console, Telnet or SSH
connections. Use the no form to disable accounting on the line.
Syntax
Default Setting
None
Console(config)#aaa group server radius tps
Console(config-sg-radius)#server 10.2.68.120
Console(config-sg-radius)#
accounting dot1x {default | list-name}
no accounting dot1x
default - Specifies the default method list created with the
dot1x
command.
list-name - Specifies a method list created with the
command.
Console(config)#interface ethernet 1/2
Console(config-if)#accounting dot1x tps
Console(config-if)#
accounting exec {default | list-name}
no accounting exec
default - Specifies the default method list created with the
exec
command.
list-name - Specifies a method list created with the
command.
– 201 –
Chapter 7
| Authentication Commands
aaa accounting
aaa accounting dot1x
aaa accounting
aaa accounting exec
AAA