AT&T Unix Owner's Manual page 8

AT&T UNIX PC 3.51 Important Information
6
5 Page 3-114. Do not turn the lever or remove
the floppy disk while the red I ight on the disk
drive is lit. wait until the procedure that
is executing has completed, or until you have
closed the Floppydisk window.
6 Page 3-141. Do not open the Office of another
user using
I
Other Users
I
while you have a data
call in process. When you exit from the Office
of the other user, the data call will be
terminated. -
7 Page 4-36. When sending mail to a system which
is a part of a network such as ISN, long or
complicated send and receive strings may be
required. These entries must be set up via
the UNIX shell by editing the file
/usr/lib/uucp/L.Sys.
The entries can not be
made using the Mail setup form in the
Administration menu. The entries should be
made according to the instructions supplied by
the person in charge of administering the
receiving computer on the network.
A typical "long" entry in /usr/1ib/uucp/L.sys
is described below. For more information about
the
uucp
system, see the UNIX Programmer
I
s
Manual, Volume 2; Holt, Rinehart, and Winston;
New York, 1983.
The example below shows how to dial up a remote
system via a switch. For lack of space, this
example is shown on two lines. The entry should
be typed on one line.
sys . Any J?hl 1200 1234567
1111
\d\r NAME? sys GO
\r 1n:--1n: nuucp word: P/W
Each field in this sample entry is described
below.
sys
The name of the remote system.