AT&T Unix Owner's Manual page 247

Setting Up the UNIX PC
For information on setting up an expansion port, see
"Setting Up Expansion Ports" in this chapter.
Before you can use the RS-232 port, you must:
o Make the physical connection using a cable
with RS-232 connectors.
o Set up (configure) your system to recognize
the type of connection you are making.
Refer to the appropriate equipment operator's manual
for cable connections. A null modem (or crossed
send/receive) cable is required when you are connecting
two pieces of equipment (such as two
UNIX
PCs or a
terminal and a
UNIX
PC) without an external modem. For
more information on null modem cables, see Appendix D.
To set up an RS-232 port:
1 Point to I Administration I in the Office of
install.
2 Press <Enter> to display the Administration
menu.
3 Point to IHardware Setup I .
51
Office of install
?
"
I
.!J
I;~rlmf~mlm
Change root password
Clipboard Changing Password
F ilecabinet
Date and Tillie
Floppydisk
Diagnostics Floppy
Preferences
Disk Backup
Printers
Disk Restore
UNIX System
IIm!n~la_~m
Wastebasket
Mail Setup
Software Setup
00 ~
System Information
User logins
~
fi
4 Press <Enter>.
The Hardware menu appears.
4-11