AT&T Unix Owner's Manual page 260

Setting
Up
the UNIX PC
You see this Printer Setup form:
II'
Serial: Port II Name
WltIWlliijl • • • •
Port 1 Name NONE
Port 2 Name NONE
Port 3 Name NONE
Port 4 Name NONE
Port 5 Name NONE
Port 6 Name NONE
Parallel: Name NONE
Remote Computer 1: Name NONE
Printer Name NONE
Remote Computer 2: Name NONE
Printer Name NONE
Default Printer Type: NONE
m
Speed 961111
Speed 961111
Speed 961111
Speed 961111
Speed 961111
Speed 961111
Speed 961111
Refer to the "Using Printers" chapter in the Working
with the Office section for information about
completing the Printer Setup form.
Setting
UP
the Built-In Modem
You can use the Modem Setup feature to configure the
built-in modem to comply with international standards.
You can configure the modem to operate in either Bell
212 or CCITT mode.
The mode settings you specify are saved in a
configuration file. Once you change the settings,
reboot the system to initialize the built-in modem to
the appropriate settings.
To set up the built-in modem for international
standards:
1
Log in as install.
2 Point to
I
Administration
I
and press <Enter>.
The Administration menu appears.
4-24