AT&T Unix Owner's Manual page 256

Setting
Up
the UNIX PC
4-20
11 Press <Return>.
The highlight moves to the Device Speed:
field. The correct device speed entry
depends on the device type you are
connecting. See the device instruction
manual for more information.
12 Press <Mark> until the correct baud rate
(line speed) appears.
13 Press <Enter>.
14 If you are configuring a terminal, an
information message tells you the RS-232 port
is now set up.
If you are configuring a modem, go to step
15. If you are configuring a computer, go to
step 16. If you are using the Other
selection, go to step 17.
15 If you are connecting a modem, the Connect to
Modem form requests the name of the modem, as
shown below:
~I
Connect to Modem
ModeM Hallie:
(;ht1h4M.JII'"
o Press <Mark> until you see the modem type
you want to use, and then press <Enter>.
An
information message tells you the RS-
232 port is set up.
o Press <Enter>.