AT&T Unix Owner's Manual page 272

updating the
UNIX
PC
Note
Remember this password! You must tell
other persons communicating with you
what password to use.
11
Press <Enter>.
A message displays the name of the system and
tells you to notify other persons with whom
you communicate.
12
Press <Enter>.
To change the password, repeat steps 5 through 8 and 11
above, making sure that NO appears in the password
field (step 8). A message informs you that the
password is removed. Then repeat steps 5 through 12,
this time with
YES
in the password field (step 8), and
enter the new password.
Setting Up Information about Other Systems
If you want to communicate with other computer systems,
you must provide information about each. Eor example,
if you want to print files on a printer attached to
another computer, you must enter information about that
computer so your UNIX PC knows where to send the files.
Eor UNIX users, this action allows uucp exchange as
well.
You must provide certain setup information about each
receiving computer. Once you provide this information,
an entry for that computer appears in the Mail Setup
menu. The following paragraphs describe how to set up
and edit information about receiving computers and how
to delete an entry from the Mail Setup menu.
4-36