AT&T Unix Owner's Manual page 292

Updating the UNIX PC
If the size fjle is found, the message
Install in progress appears as the software
is installed. Skip to step 9.
If the size file is not found, you see the
Install form shown below. Continue on to
step 8.
Number of diskettes:
~
IIilIl
8 Type the number of floppy disks in the set of
disks containing the software, and then press
<Enter>.
The message Install in progress appears as
the software is installed.
9 You are notified when to remove the first
floppy disk and insert the next one (if the
set contains more than one floppy disk) .
After inserting the next floppy disk, press
<Return> as you are prompted.
10 Continue removing and inserting floppy disks
in sequence until the software package is
installed.
You are notified when to remove the last floppy disk.
The system continues the installation process.
Depending on the software you are installing, you may
be asked specific questions about the program. Refer
to the appropriate application manual if you need
assistance.
You are notified when the software is installed.
4-56