AT&T Unix Owner's Manual page 6

AT&T
UNIX
PC 3.51 Important Information
4
d Point to the
Enable Hardware Flow Control
'?
field. Select <Yes> to enable Hardware
Flow Control. Select <No> to disable it.
7 Page 4-26. There are two IPC drivers listed
in the Loadable Device Driver Interface window:
standard sys V IPC (lipc)
and
Enhanced sys V IPC (nipc)
The standard IPC driver :viII be loaded by
default and should
rema~n
so under most
circumstances. The enhanced IPC driver is a
noncertified version containing fixes for
specific system problems. If when running a
particular software package you receive a
system message indicating:
kernel crash: rmfree panic
you should unload the standard IPC driver and
load the enhanced IPC driver. Follow the
directions in the Owner's Manual.
8 Page 4-39. The electronic mail names of other
computers may now have up to eight (8)
characters.