Z = 9: Rough paper
◦
Z = A: Extra heavy glossy paper (glossy paper 3)
◦
Z = B: Heavy glossy paper (glossy paper 2)
◦
Z = C: Heavy paper 3
◦
Z = D: Heavy paper 2
◦
Recommended action
1.
Load the tray with the size and type of paper indicated, or use another tray if available.
2.
If this message appears and the tray is loaded with the correct paper type, check the print driver
settings to make sure that they match the tray type settings.
3.
Clean the paper sensor.
4.
If the error persists, replace the paper pickup assembly.
41.WX.YZ Error To use another tray, touch "Options"
Description
A printer error has occurred.
WX =
02: Beam detected misprint error
◦
06: ITB top detection error
◦
07: Paper transportation error
◦
08: Optional input source delay
◦
09: Sub-thermistor abnormally high temperature
◦
18: Scan line inclination adjustment request
◦
19: T2 roller HV
◦
20: Image drum HV
◦
Y = fuser mode
0: Photo paper 1, Photo paper 2, Photo paper 3, Designated paper 2, Designated paper 3, or
◦
NA, typed or Auto sense
1: Auto sense (normal): special case distinguished from typed Normal
◦
2: Normal, typed (not Auto sense)
◦
3: Light paper 1, 2, or 3, typed or Auto sense
◦
4: Heavy paper 1, typed or Auto sense
◦
346
Chapter 2 Solve problems
ENWW