HP LASERJET ENTERPRISE M725dn Troubleshooting Manual page 296

Table 2-22 General Print Settings
First level
PCL
264 Chapter 2 Solve problems
menu (continued)
Second level
Form Length
Orientation
Font Source
Font Number
Font Pitch
Font Point Size
Symbol Set
Values
Range: 5 – 128
Default = 60
Portrait*
Landscape
Internal*
Range: 0 – 110
Default = 0
Range: 0.44 – 99.99
Default = 10
Range: 4.00 – 999.75
Default = 12.00
Select from a list of symbol sets.
Description
Controls the PCL print-command
options. PCL is a set of
productcommands that Hewlett-
Packard developed to provide
access to productfeatures.
Use the Form Length feature to
select the user-soft default vertical
form length.
Select the orientation that is most
often used for copy or scan
originals. Select the Portrait
option if the short edge is at the
top or select the Landscape
option if the long edge is at the
top.
Selects the font source for the
user-soft default font. The list of
available options varies
depending on the installed
product options.
Specifies the font number for the
user-soft default font using the
source that is specified in the
Font Source menu. The product
assigns a number to each font
and lists it on the PCL font list.
The font number displays in the
Font # column of the printout.
If the Font Source option and the
Font Number setting indicate a
contour font, then use this feature
to select a default pitch (for a
fixed-spaced font).
If the Font Source option and the
Font Number setting indicate a
contour font, then use this feature
to select a default point size (for
a proportional-spaced font).
Select any one of several
available symbol sets from the
control panel. A symbol set is a
unique grouping of all the
characters in a font. The factory
default value for this option is
PC-8. Either PC-8 or PC-850 are
recommended for line-draw
characters.
ENWW