Paper path test
This diagnostic test generates one or more test pages that you can use to isolate the cause of jams.
To isolate a problem, specify which input tray to use, specify whether to use the duplex path, and then
specify the number of copies to print. Multiple copies can be printed to help isolate intermittent
problems. The following options become available after you start the diagnostic feature:
Print Test
●
To specify other settings, scroll down the menu and select the setting, and then scroll back up and
select
Source
●
Output
●
Test Duplex
●
Number of
●
500.
1.
From the Home screen on the product control panel, scroll to and touch the
2.
Open the following menus:
Troubleshooting
●
Diagnostic Tests
●
Paper Path Test
●
3.
Select the paper-path test options for the test you want to run.
138
Chapter 2 Solve problems
Page: Run the paper-path test from the default settings: Tray 2, no duplex, and one copy.
Print Test Page
to start the test.
Tray: Select Tray 1, Tray 2, or the optional tray.
Bin: Select
All
bins,
Face
Path: Enable or disable two-sided printing.
Copies: Set the numbers of copies to be printed; the choices are 1,10, 50, 100, or
down, or
Face
up.
Administration
button.
ENWW