HP LASERJET ENTERPRISE M725dn Troubleshooting Manual page 306

Table 2-26 Manage Trays
First level
Use Another Tray
Alternative Letterhead Mode
Duplex Blank Pages
Override A4/Letter
274 Chapter 2 Solve problems
menu (continued)
Values
Enabled*
Disabled
Disabled*
Enabled
Auto*
Yes
Yes*
No
Description
Use to turn on or off the control-panel prompt
to select another tray when the specified tray
is empty. Two options are available:
Enabled: When this option is selected, the
user is prompted either to add paper to the
selected tray or to choose a different tray.
Disabled: When this option is selected, the
user is not given the option of selecting a
different tray. The product prompts the user
to add paper to the tray that was initially
selected.
Use to load letterhead or preprinted paper
into the tray the same way for all print jobs,
whether you are printing to one side of the
sheet or to both sides of the sheet. When this
option is selected, load the paper as you
would for printing on both sides. See the
user documentation that came with the
product for instructions about loading
letterhead for printing on both sides. When
this option is selected, the product speed
slows to the speed required for printing on
both sides.
Control how the product handles two-sided
jobs (duplexing). Two options are available:
Auto: This option enables Smart Duplexing,
which instructs the product not to process
blank pages.
Yes: This option disables Smart Duplexing
and forces the duplexer to flip the sheet of
paper even if it is printed on only one side.
This might be preferable for certain jobs that
use paper types such as letterhead or
prepunched paper.
Prints on letter-size paper when an A4 job is
sent but no A4-size paper is loaded in the
product (or to print on A4 paper when a
letter-size job is sent but no letter-size paper
is loaded). This option will also override A3
with ledger-size paper and ledger with A3-
size paper.
ENWW