Default Print Options Menu - HP LASERJET ENTERPRISE M725dn Troubleshooting Manual

Default Print Options menu

To display: At the product control panel, select the
Print Options
In the following table, asterisks (*) indicate the factory default setting.
Table 2-23 Default Print Options
First level
Number of Copies
Default Paper Size
Default Custom Paper Size
Sides
266 Chapter 2 Solve problems
menu.
menu
Second level
X Dimension
Y Dimension
Use Inches
Administration menu, and then select the
Values
Range: 1–32000
Default = 1
Select from a list of sizes that the
product supports.
Range: 3–8.5 inches
Default = 8.5 inches
Range: 5–14 inches
Default = 14 inches
Enabled*
Disabled
1-sided*
2-sided
Default
Description
Sets the default number of copies
for a copy job. This default
applies when the Copy function
or the Quick Copy function is
initiated from the product Home
screen.
Configures the default paper size
used for print jobs.
Configures the default paper size
that is used when the user selects
Custom as the paper size for a
print job.
Use to indicate whether the
original document is printed on
one or both sides, and whether
the copies should be printed on
one or both sides. For example,
select the 1-sided original, 2-
sided output option when the
original is printed on one side,
but you want to make two-sided
copies.
Select the Orientation setting to
specify portrait or landscape
orientation and to select the way
the second sides are printed.
ENWW