Avoid Paper Jams; Load Paper; Load The Main Paper Tray - HP 610 Reference Manual

avoid paper jams

load paper

load the main
paper tray
load paper and originals
To avoid paper jams, be sure to not overload the input trays. Make sure
your paper edges are not bent or crumpled in any way. Additionally, it is
a good idea to remove papers from the output tray frequently. The output
tray capacity is affected by the type of paper and the amount of ink you
are using. For more information about output tray capacity, see on
page 84.
Following is the basic procedure for loading paper. There are specific
considerations for loading certain types of paper, transparency film, and
envelopes. After you review this procedure, see tips for loading other types
of paper in the main tray on page 12.
For best results, adjust the paper settings each time you change paper types
or paper sizes. For more information, see choose the paper tray and set the
paper type on page 13.
If you have the optional 250-sheet plain paper tray, you can load paper
into both the main paper tray and the optional 250-sheet plain paper tray.
If you have the optional 250-sheet plain paper tray, you should use it for
plain paper only. See load paper in the optional 250-sheet plain paper tray
on page 33 for more information.
You must also have the two-sided printing accessory installed to use the
optional 250-sheet plain paper tray. For more information, see attach the
two-sided printing accessory on page 29.
1
Make sure that the unit is on a flat, level surface.
2
Make sure that the input tray is pushed completely into the unit.
3
Make sure that the loaded paper is pushed completely back against
the backstop of the paper tray.
4
Lift the output tray up until it catches in the raised position, and slide
the paper-width and paper-length guides to their outermost positions.
hp digital copier series
9