13.80.D1 Jam in upper left door
Description
Input delay jam. Paper did not arrive at the jam inlet sensor (SR2100).
Recommended action
1.
Open the upper left door
2.
Remove all paper found.
3.
Close the upper left door.
4.
If the error persists, replace the stapler/stacker paper feed assembly.
13.80.FF Jam in upper left door
Description
Input initial jam. At power on, the paper was detected at the inlet sensor (2100).
Recommended action
1.
Open the upper left door.
2.
Remove all paper found.
3.
Lower the stacker bin if it is in the up position, and then close the upper left door.
4.
If the error persists, replace the stapler/stacker.
13.84.A1 Jam in upper bin
Description
Exit stay jam. The paper exit sensor (SR2103) at the accumulator stayed activated for too long.
Recommended action
1.
Remove all paper in the upper bin.
2.
Open the upper left door.
3.
Remove all paper found.
4.
Close the upper left door.
5.
If the error persists, replace the stapler/stacker alignment assembly.
13.84.FF Jam in upper bin
Description
Exit initialization jam. At power on, paper was detected to be present on the exit sensor (SR2103).
ENWW
Tools for troubleshooting
297