Stapler/stacker jam detection
The stapler/stacker uses the following sensors to detect the presence of paper and to check whether the
paper is being fed correctly or has jammed:
Inlet sensor (SR2100)
●
Output sensor (SR2103)
●
Figure 1-80
Inlet delay jam
The output sensor does not detect the leading edge of paper within a specified period from when the
leading edge reaches the output sensor in the product.
Inlet stay jam
The inlet sensor does not detect the trailing edge of the paper within a specified period from when it
detects the leading edge.
Paper stack output stay jam
The output sensor does not detect the trailing edge of the paper stack within a specified period from
when the feed motor starts rotating after the staple operation is complete.
ENWW
Stapler/stacker jam sensors
SR2103
Output sensor
SR2100
Inlet sensor
Stapler/stacker
107