Table of Contents
Advertisement
The transfer roller cleaning is performed during the WAIT period, INTR period, LSTR period, and after
forming the image for the front side of the page when duplex printing.
Figure 1-23
Transfer roller cleaning
Cleaning blade
Photosensitive
drum
Toner collection box
Transfer roller
Reverse transfer bias
Environment change control
The environment change control calibrates each high-voltage bias to obtain an appropriate image
according to the environment changes.
The DC controller determines the environment, where the product is installed, based on the surrounding
temperature and humidity data from the environment sensor. It adjusts the high-voltage biases to
accommodate environmental changes.
The DC controller determines an environment sensor abnormality and notifies the formatter when it
detects out of specified range data from the environment sensor.
32
Chapter 1 Theory of operation
ENWW
Advertisement
Table of Contents
Troubleshooting
