Table of Contents
Advertisement
13.E6.BD Jam in left door
Description
Multi-feed from duplexer jam. This jam occurs when the engine detects a multi-feed in the output path
from the duplexer.
Recommended action
Check the paper path and rollers at the fuser and the duplexer for damage or wear. Replace the fuser
or duplexer if necessary.
13.E6.BX Jam in left door
Description
Multi-fold from Tray 1–6 jam. This jam occurs when the engine detects a multi-feed in the output path
from the indicated source tray.
X indicates the source tray
1 = Tray 1
◦
2 = Tray 2
◦
3 = Tray 3
◦
4 = Tray 4
◦
5 = Tray 5
◦
6 = Tray 6
◦
Recommended action
1.
Open the left door, remove any jammed paper, and then close the left door.
2.
Check the pickup, feed, and separation rollers from the source tray. Replace the rollers if they are
worn or defective.
13.E6.DX Jam in left door
Description
Late to output jam. This jam occurs when the paper fails to reach the output sensor (SR3) within a
specific time.
X indicates the fuser mode
2 = Normal
◦
3 = Light media 1
◦
3 = Light media 2
◦
4 = Heavy media 1
◦
322
Chapter 2 Solve problems
ENWW
Advertisement
Table of Contents
Troubleshooting
