Receive-Fax Messages; Table 2-37 Receive-Fax Messages - HP LASERJET ENTERPRISE M725dn Troubleshooting Manual

Receive-fax messages

Table 2-37 Receive-fax messages
Message
Success
Blocked
Failed
Failed
Failed
Failed
Space Fail
Memory Error
Print Fail
Power Failure
No Fax Detected
466 Chapter 2 Solve problems
Error No.
n/a
n/a
Any
0
17, 36
Any besides 17 or 36
0
0
0
0
17, 36
Description
The fax transmission was
successful.
The receiving fax machine is
using the blocked-number feature
and is blocking this fax.
The fax might be corrupted or
not sent.
Incompatible page width or
page had too many bad lines.
Lost telephone connection or
interruption between sender/
receiver.
General communications issue
where the fax transmission was
interrupted or did not proceed as
expected.
Unable to read or write image
file to disk; could be corrupt
product disk or no space on disk.
Out of memory on product.
The received image file cannot
be decoded.
A power failure occurred during
the fax reception.
A voice call was made to the
fax.
Action
None.
None.
Ask the sender to resend the fax;
if the error persists, contact
support.
Ask the sender to resend the fax;
if the error persists, contact
support.
Ask the sender to resend the fax
(if the sending machine does not
automatically retry).
Ask the sender to resend the fax;
if the error persists, contact
support.
Ask the sender to resend the fax;
if the error persists, contact
support.
If the error persists, delete items
from the product memory, such
as stored jobs or saved faxes.
Ask the sender to resend the fax;
enable Error Correction Mode if
it is not already enabled.
Ask the sender to resend the fax.
None
ENWW