Table of Contents
Advertisement
Calibration/Cleaning menu
To display: At the product control panel, select the
Calibration/Cleaning
In the following table, asterisks (*) indicate the factory default setting.
Table 2-31 Calibration/Cleaning
First level
Cleaning Settings
Cleaning Page
Calibrate Scanner
Clean Rollers
Clean Document Feeder Settings
294
Chapter 2 Solve problems
menu.
menu
Second level
Auto Cleaning
Cleaning Interval
Cleaning Size
Low Threshold Settings
Very Low Settings
Device Maintenance
Values
Off*
On
Select from a list of cleaning
intervals.
Select from a list of support sizes. Select the paper size to use for
Print
Range: 0–100%
Default = 10%
Stop
Prompt to
continue*
Continue
menu, and then select the
Description
Use to select the
Auto Cleaning
menu or the
Cleaning Interval
menu.
Use to set the interval when the
cleaning page should be printed.
The interval is measured by the
number of pages printed.
the cleaning page.
Use to process the cleaning page
that was created by using the
Create Cleaning Page
menu. The
process takes up to 1.5 minutes.
Touch
Next
to calibrate the
device scanner. Messages on the
control panel display will lead
you through the calibration
process.
Perform automatic cleaning for
the document-feeder rollers.
Configure cleaning settings for
the document feeder.
ENWW
Advertisement
Table of Contents
Troubleshooting
